Cover Image

Carbon Nanotube Nanocomposite: Toxicology Impact

Ayesha Kausar

Abstract


Carbon nanotube is an important new type of technological material with numerous advantageous properties. Carbon nanotube nanocomposites have found success in several material science applications. This review actually focused toxicological effects and standards for the use of carbon nanotube nanocomposites. Assessments of toxicological properties of inhaled nanomaterials, skin contacted, and ingested materials have mentioned their toxicity and safe use is warranted. Investigations have shown that the uncertainty of nature, mechanism, and exposure response of carbon nanotube nanocomposites may cause adverse effects. Functionalization and modification of nanoparticles must be concentrated for advance applications and may prevent oxidative stress and inflammation of organs.


Keywords


Carbon nanotube; nanocomposite; toxicity; modification

References


Kausar A. Nanodiamond reinforcement in polyamide and polyimide matrices: Fundamentals and applications. Journal of Plastic Film & Sheeting. 2018, 34(4):439-458

Kausar A. Thermal conductivity measurement of polyvinylpyrrolidone/ polyethylene/graphene nanocomposite. Nanosci Nanotechnol. 2016, 6:34-37

Kausar A and Hussain ST. Effect of multi-walled carbon nanotube reinforcement on the physical properties of poly (thiourea-azo-ether)-based nanocomposites. Journal of Plastic Film & Sheeting. 2013, 29(4):365-383

Kausar A. Estimation of thermo-mechanical and fire resistance profile of epoxy coated polyurethane/fullerene composite films. Fullerenes, Nanotubes and Carbon Nanostructures. 2016, 24(6):391-399

Kausar A. Carbon nano onion as versatile contender in polymer compositing and advance application. Fullerenes, Nanotubes and Carbon Nanostructures. 2017, 25(2):109-123

Kausar A and Hussain ST. Processing and properties of new heteroaromatic Schiff-base poly (sulfone-ester) s and their blends. Iranian Polymer Journal. 2013, 22(3):175-185

Kausar A Zulfiqar S, Ahmad Z and Sarwar MI. Novel processable and heat resistant poly (phenylthiourea azomethine imide) s: Synthesis and characterization. Polymer Degradation and Stability. 2010, 95(9):1826-1833

Kausar A. Review on Structure, Properties and Appliance of Essential Conjugated Polymers. American Journal of Polymer Science & Engineering. 2016, 4(1):91-102

Kausar A. Design of Polydimethylsiloxane/Nylon 6/Nanodiamond for Sensor Application. Int J Instrumentat Sci. 2016, 5(1):15-18

Kausar A, Rafique I, Anwar Z and Muhammad B. Perspectives of epoxy/graphene oxide composite: Significant features and technical applications. Polymer-Plastics Technology and Engineering. 2016, 55(7):704-722

Kausar A and Ashraf R. Electrospun, non-woven, nanofibrous membranes prepared from nano-diamond and multi-walled carbon nanotube-filled poly (azo-pyridine) and epoxy composites reinforced with these membranes. Journal of Plastic Film & Sheeting. 2014, 30(4):369-387

Kausar A. Proton exchange fuel cell membranes of poly (benzimidazole-amide)/sulfonated polystyrene/titania nanoparticles-grafted-multi-walled carbon nanotubes. Journal of Plastic Film & Sheeting. 2015, 31(1):27-44

Kausar A. Iqbal, A. and Hussain, S.T., Novel hybrids derived from poly (thiourea-amide)/epoxy and carbon nanotubes. Polymer-Plastics Technology and Engineering. 2013, 52(11):1169-1174

Kausar A and Hussain ST. Poly (azo-ether-imide) nanocomposite films reinforced with nanofibers electrospun from multi-walled carbon nanotube filled poly (azo-ether-imide). Journal of Plastic Film & Sheeting. 2014, 30(3):266-283

Kausar A. Polyamide-grafted-multi-walled carbon nanotube electrospun nanofibers/epoxy composites. Fibers and Polymers. 2014, 15(12):2564-2571

Kausar A and Hussain ST. Effect of modified filler surfaces and filler-tethered polymer chains on morphology and physical properties of poly (azo-pyridyl-urethane)/multi-walled carbon nanotube nanocomposites. Journal of Plastic Film & Sheeting. 2014, 30(2):181-204

Kausar A. Hybrids of Polystyrene-b-Poly (ethylene-ran-butylene)-b-Polystyrene Reinforced by Electrospun Polyimide/Carbon Nanotube Nanofibers: Preparation and Properties. American Journal of Materials Science. 2014, 4(4):169-177

Kausar A. Rafique, I. and Muhammad, B., Aerospace application of polymer nanocomposite with carbon nanotube, graphite, graphene oxide, and nanoclay. Polymer-Plastics Technology and Engineering. 2017, 56(13):1438-1456

Kausar A. Synthesis and properties of melt processed poly (thiourea-azosulfone)/carbon nanotubes nanocomposites. Chinese Journal of Polymer Science. 2014, 32(1):64-72

Kausar A. Novel water purification membranes of polystyrene/multi-walled carbon nanotube-grafted-graphene oxide hybrids. Am J Polym Sci. 2014, 4:63-72

Kausar A. Nanodiamond tethered epoxy/polyurethane interpenetrating network nanocomposite: Physical properties and thermoresponsive shape-memory behavior. International Journal of Polymer Analysis and Characterization. 2016, 21(4):348-358

Kausar A. Advances in polymer/fullerene nanocomposite: a review on essential features and applications. Polymer-Plastics Technology and Engineering. 2017, 56(6):594-605

Kausar A. Review on polymer/halloysite nanotube nanocomposite. Polymer-Plastics Technology and Engineering. 2018, 57(6):548-564

Kausar A. Waterborne polyurethane-coated polyamide/fullerene composite films: Mechanical, thermal, and flammability properties. International Journal of Polymer Analysis and Characterization. 2016, 21(4):275-285

Kausar A. Electromagnetic interference shielding of polyaniline/Poloxalene/carbon black composite. Int J Mater Chem. 2016, 6:6-11

Kausar A. A Study on Poly (vinyl alcohol-co-ethylene)-graft-Polystyrene Reinforced with Two Functional Nanofillers. Polymer-Plastics Technology and Engineering. 2015, 54(7):741-749

Kausar A. Formation and properties of poly (vinyl butyral-co-vinyl alcohol-co-vinyl acetate)/polystyrene composites reinforced with graphene oxide-nanodiamond. Am J Polym Sci. 2014, 4:54-62

Kausar A. Polyurethane composite foams in high-performance applications: A review. Polymer-Plastics Technology and Engineering. 2018, 57(4):346-369

Kausar A. State-of-the-Art overview on polymer/POSS nanocomposite. Polymer-Plastics Technology and Engineering. 2017, 56(13):1401-1420

Kausar A. Enhanced electrical and thermal conductivity of modified poly (acrylonitrile-co-butadiene)-based nanofluid containing functional carbon black-graphene oxide. Fullerenes, Nanotubes and Carbon Nanostructures. 2016, 24(4):278-285

Kausar A. Scientific potential of chitosan blending with different polymeric materials: A review. Journal of Plastic Film & Sheeting. 2017, 33(4):384-412

Kausar A. Ahmad, S. and Salman, S.M., Effectiveness of polystyrene/carbon nanotube composite in electromagnetic interference shielding materials: a review. Polymer-Plastics Technology and Engineering. 2017, 56(10):1027-1042

Kausar A. Fabrication and properties of polyamide and graphene oxide coated carbon fiber reinforced epoxy composites. Am J Polym Sci. 2014, 4(3):88-93

Kausar A. Investigation on self-assembled blend membranes of polyethylene-block-poly (ethylene glycol)-block-polcaprolactone and poly (styrene-block-methyl methacrylate) with polymer/gold nanocomposite particles. Polymer-Plastics Technology and Engineering. 2015, 54(17):1794-1802

Kausar A. Enhancement of Electrical and Mechanical Properties of Polycarbonate/Poly(Ethylene Oxide) and Carbon Black Composite. American Journal of Current Organic Chemistry. 2016, 2(1):1-8

Kausar A. A study on high-performance poly (azo-pyridine-benzophenone-imide) nanocomposites via self-reinforcement of electrospun nanofibers. Iranian Polymer Journal. 2014, 23(2):127-136

Kausar A. A review of filled and pristine polycarbonate blends and their applications. Journal of Plastic Film & Sheeting. 2018, 34(1):60-97

Kausar A. Topical Progression in Organic and Inorganic Membranes for Advance Application: A Review. American Journal of Polymer Science & Engineering. 2016, 4(1):60-81

Kausar A. Scrutinization of Poly (ethylene-co-ethyl acrylate)/Poly (methyl acrylate) and Zein-based Nanocomposite. American Journal of Polymer Science & Engineering. 2016, 4(1):8-16

Kausar A. Zulfiqar, S., Shabbir, S., Ishaq, M. and Sarwar, M.I., Mechanical properties of functionalized SEBS based inorganic hybrid materials. Polymer Bulletin. 2007, 59(4):457-468

Kausar A. Zulfiqar, S. and Sarwar, M.I., Recent developments in sulfur-containing polymers. Polymer Reviews. 2014, 54(2):185-267

Kausar A. Mechanical, thermal, and electrical properties of epoxy matrix composites reinforced with polyamide-grafted-MWCNT/poly (azo-pyridine-benzophenone-imide)/polyaniline nanofibers. International Journal of Polymeric Materials and Polymeric Biomaterials. 2014, 63(16):831-839

Kausar A. and Ur Rahman, A., Effect of graphene nanoplatelet addition on properties of thermo-responsive shape memory polyurethane-based nanocomposite. Fullerenes, Nanotubes and Carbon Nanostructures. 2016, 24(4):235-242

Kausar A. Bucky papers of poly (methyl methacrylate-co-methacrylic acid)/polyamide 6 and graphene oxide-montmorillonite. Journal of Dispersion Science and Technology. 2016, 37(1):66-72

Kausar A. and Hussain, S.T., Synthesis and properties of poly (thiourea-azo-naphthyl)/multi-walled carbon nanotube composites. Journal of Plastic Film & Sheeting. 2014, 30(1):6-27

Kostarelos, K., 2008, The long and short of carbon nanotube toxicity. Nature biotechnology. 26(7), p.774

Kolosnjaj J. Szwarc,H and Moussa F. Toxicity studies of carbon nanotubes. In Bio-Applications of Nanoparticles (pp. 181-204). Springer, New York, NY, 2007,

Kausar A. Potential of Polymer/Graphene Nanocomposite in Electronics. American Journal of Nanoscience and Nanotechnology Research. 2018, 6(1):55-63

Kausar A. Properties and Applications of Nanodiamond Nanocomposite. American Journal of Nanoscience and Nanotechnology Research. 2018, 6(1):46-54.

Kausar A. Iqbal, A. and Hussain, S.T., Preparation and properties of polyamide/epoxy/multi-walled carbon nanotube nanocomposite. Journal of Plastic Film & Sheeting. 2014, 30(2):205-224.

Kausar A. Investigation on nanocomposite membrane of multiwalled carbon nanotube reinforced polycarbonate blend for gas separation. Journal of Nanomaterials. 2016.

Kausar A. Study on physical properties of poly (methyl methacrylate)/poly (thiophene amide)–silica–titania-grafted multiwalled carbon nanotube-based nanofiber composites. High Performance Polymers. 2014, 26(8):961-969

Kausar A. Amalgamation of Nanodiamond and Epoxy. American Journal of Polymer Science & Engineering. 2017, 5(1):34-42

Kausar A. Polyaniline composites with nanodiamond, carbon nanotube and silver nanoparticle: Preparation and properties. American Journal of Polymer Science & Engineering. 2015, 3(2):149-160

Kausar A. Overview on conducting polymer in energy storage and energy conversion system. Journal of Macromolecular Science, Part A. 2017, 54(9):640-653

Kausar A. and Anwar S. Graphite filler-based nanocomposites with thermoplastic polymers: a review. Polymer-Plastics Technology and Engineering. 2018, 57(6):565-580

Kausar A. Nanocarbon-based Nanocomposite in Green Engineering. Res J Nanosci Engineer. 2018, 2:28-33


Full Text: PDF

Refbacks

  • There are currently no refbacks.


AJT (ISSN 2689-1875)© 2012-2019. All rights reserved. Published by Ivy Union Publishing, 3204 Valley Rush Dr, Apex, North Carolina 27502, United States