Synthesis and Characterization of Novel Nanobifiller filled Epoxy Anti-Corrosive Nano-Organic coating for High Performance Automotive Applications
Abstract
Keywords
References
Gergely A, Pfeifer E, Bertóti I, Torok T, Kálmán E. Corrosion protection of cold-rolled steel by zinc-rich epoxy paint coatings loaded with nano-size alumina supported polypyrrole. Corros Sci. 2011, 53:3486-3499
Dementjev AP and Maslakov KI. Chemical state of carbon atoms on a nanodiamond surface: Growth mechanism of detonation nanodiamond. Fuller Nanotub Car N. 2012, 20:594-599
Kevin L and White HJ. Electrical Conductivity and Fracture Behavior of Epoxy/Polyamide-12/Multiwalled Carbon Nanotube Composites. Polym Eng Sci. 2011, 51:2245-2253
Golru SS, Attara MM, Ramezanzadeh B. Studying the influence of nano-Al2O3 particles on the corrosion performance and hydrolytic degradation resistance of anepoxy/polyamide coating on AA-1050. Prog Org Coat. 2014, 77:1391-1399
Ramezanzadeh B, Attar MM, Farzam MA. Study on the anticorrosion performance of the epoxy–polyamide nanocomposites containing ZnO nanoparticles. Prog Org Coat. 2011, 72:410-422
Gul S, Kausar A, Muhammad B, Jabeen S. Research Progress on Properties and Applications of Polymer/Clay Nanocomposite. Polym-Plast Technol. 2015, 55:684-703
Chang IP, Hwang KC, Chiang CS. Preparation of fluorescent magnetic nanodiamond and cellular imaging. J Am Chem Soc. 2008, 130:15476-15481
Chao JI, Perevedentseva E, Chung PH, Liu KK, Cheng CY, Chang CC, Cheng CL. Nanometer-sized diamond particle as a probe for biolabeling. Biophys J. 2007, 93:2199-2208
Jabeen S, Kausar A, Muhammad B, Gul S, Farooq M. A Review on Polymeric Nanocomposites of Nanodiamond, Carbon Nanotube, and Nanobifiller: Structure, Preparation and Properties. Polym-Plast Technol. 2015, 54:1379-1409
Shin MK, Lee B, Kim SH, Lee JA, Spinks GM, Gambhir S, Wallace GG, et.al. Synergistic toughening of composite fibres by self-alignment of reduced grapheme oxide and carbon nanotubes. Nat Commun. 2012, 48:650-661
Pradhan B and Srivastava SK. Synergistic effect of three-dimensional multi-walled carbon nanotube-graphene nanofiller in enhancing the mechanical and thermal properties of high-performance silicone rubber. Polym Int. 2014, 63:1219-1228
Li W, He D, Bai J. The Influence of nano/micro hybrid structure on the mechanical and self-sensing properties of carbon nanotube-microparticle epoxy matrix composite. Compos Part A Sci Manufact. 2013, 54:28-36
Chatterjee S, Nafezarefi F, Tai NH, Schlagenhauf L, Nuesh FA, Chu BT. Size and synergy effects of nanofiller hybrids including grapheme nanoplatelets and carbon nanotubes in mechanical properties of epoxy composites. Carbon. 2012, 50:5380-5386
Hussain ST, Abbas F, Kausar A, Khan MR. New polyaniline/polypyrrole/ polythiophene and functionalized multiwalled carbon nanotube-based nanocomposites: Layer-by-layer in situ polymerization. High Perform Polym. 2012, 25:70-78
Khoshniyata A, Hashemib A, Sharifa A, Aalaiea J, Duobisc. Effect of surface modification of bentonite nanoclay with polymers on its stability in an electrolyte solution. Polymer Science, Ser B. 2012, 54:61-72
Kibsgaard J, Chen Z, Reinecke BN, Jaramillo TF. Engineering the surface structure of MoS2 to preferentially expose active edge sites for electrocatalysis. Nat Mater. 2012, 11:963-969
Muthuraaman B, Shanmugam T, Maruthamuthu P, Nasar AS. Dye-Sensitized Solar Cell Based on a Blend of Hyperbranched Poly(aryl-ether-urethane) Electrolyte with TiO2 Nanoparticles. J Macromol Sci A. 2010, 47:965-970
Brito GF, Agrawal P, Araújo EM., de Mélo TJ. Polylactide/Biopolyethylene Bioblends, Polímeros. 2012, 22:427-429
Liu C, Luo YF, Jia1 ZX, Zhong BC, Li SQ, Guo1 GC, Jia1 DM. Enhancement of mechanical properties of poly(vinyl chloride) with polymethyl methacrylate-grafted halloysite nanotube. Express Polym Lett. 2011, 5:591-603
Refbacks
- There are currently no refbacks.
