Cover Image

Investigation on the Bio-degradability of the Starch Modified Polypropylene with the Help of Maleic Anhydride as a Coupling Agent

Ashish Virmani, Ravi Kumar Sharma, Omprakash Yadav, Anil Kumar

Abstract


Polypropylene was modified with starch in 1/20 ratio by adding a coupling agent in the absence and presence of a compatiblizer so as to produce a modified polypropylene with the advantage of bio-degradability in lesser time as compare to normal time span of degradation. As polypropylene a hydrophobic material and starch a hydrophilic material, so maleic anhydride was used as a coupling agent and PVA used as a compatiblizer to produce proper formation of bond. For the proper inter-mixing of the polymers they were swollen by aromatic compound such as toluene at elevated temperature. The material produced was tested in IR spectroscopy, universal testing machine, water absorption test, soil burial test and scanning electron microscopy for the checking of proper inter-mixing, change in mechanical properties and to check the bio-degradability respectively.

Keywords


biodegradable; composite; PVA; soil

Full Text:

PDF

References


Pogaku R, Awang B, Christopher C. Developments in Sustainable Chemical and Bioprocess Technology. New York Heidelberg Dordrecht, London, Springer, 2013

Majumda J, Cser F, Jollands MC and Shanks RA. Thermal Properties of polypropylene post-consumer waste (PP PCW). Journal of Thermal Analysis and Calorimetry. 2004, 78:849-863

Marcilla A, Gomez A, Reyes-Labarta JA and Giner A. Polymer Degradation Stability. 2003, 80:233-240

Mrkic S, Galic K and Ivankovic M. Effect of Temperature and Mechanical tress on Barrier Properties of Polymeric Films Used for Food Packaging. Journal of Plastics Film and Sheeting. 2007, 23:239

Arkatkar A, Arutchelvi J, Sudhakar M, Bhaduri S, Uppara PV and Doble M. Approaches to enhance the biodegradation of polyolefins. The Open Environmental Engineering Journal. 2009, 2:68-80

Gu J-D. Microbiological deterioration and degradation of synthetic polymeric materials: recent research advances. International Biodeterioration and Biodegradation. 2003, 52:69-91

Albertsson AC and Karlsson, S. Aspects of biodeterioration of inert and degradable polymers. International Biodeterioration and Biodegradation. 1993, 31:161-170

Ogier L, Rabello MS and White JR. Influence of morphology and surface preparation on the weatherability of polypropylene. Journal of Materials Science. 1995, 30(29):2364-2376

Severine F, Gallo R and Ipsale S, Some aspects of the environmental photo-degradation of LDPE. Polymer Degradation Stability. 1998, 22(1):53-61

Billingham NC and Calved PD. An Introduction- Degradation and Stabilization of Polyolefins. London: Aplied Science Publishers, 1983

Hinsken H, Moss S, Pauquet JR and Zweifel H. Degradation of polyolefins during melt processing. Polymer Degradation Stability. 1991, 34(1 3):279-293

Kelen T. Polymer Degradation. Van nostrad Reinhold. New York: United States, 1983.

Whiteeley KS, Heggs TG, Koch H and Mawer RL. Polyolefins. In: Ullmann’s Encyclopedia of Industrial Chemistry. New York: Elsevier's, VCH, 1982. 487 p

Canevarolo SV. Chain scission distribution function for polypropylene degradation during multiple extrusions. Polymer Degradation and Stability. 2000, 709:71-76

Premraj R and Doble M. Biodegradation of polymers. Indian Journal of Biotechnology. 2005, 4:186-193

Arutchelvii J, Sudhakar M, Arkatkar A, Doble M, Bhaduri S and Uppara PV. Biodegradation of polyethylene and polypropylene. Indian Journal of Biotechnology. 2008, 7:9-22

Fleming H-C. Relevance of biofilms for the biodeterioration of surfaces of polimeric materials. Polymer Degradation and Stability. 1998, 59:309-315

Albertsson AC and Karlsson S. Macromolecular Architecture-Nature as a Model for degradable polymers. Journal of Macromolecular Science, Part A: Pure Applied Chemistry. 1996, 33(10):1571-1579

Vander Wal A, Mulder JJ and Gaymans RJ. Facture of polypropylene: 2. The effect of crystallinity. Polymer. 1998, 39:5477-5481

Sudhakar M, Doble M, Sriyutha MP and Venkatesan R. Marine microbe mediated biodegradation of low and high density polyethylenes. International Biodeterioration and Biodegradation. 2008, 61:203-213

Sudhakar M, Trishul A, Doble M, Suresh K, Syed J, Umadevi VR et al. Biofouling and biodegradation of polyolefins in ocean waters. Polymer Degradation and Stability. 2007, 92:1743-1752

Liang CY and Pearson FG. Infrared spectra of crystalline and stereoregular polymers. Part I. Polypropylene. Journal of Molecular Spectroscopy. 1960, 5:290-306

Hoff, Ray and Mathers, Robert T. Handbook of Transition Metal Polymerization Catalysts. John Wiley & Sons. 2010, pp. 158

Moore, EP. Polypropylene Handbook. Polymerization, Characterization, Properties, Processing, Applications, Hanser Publishers: New York, 1996

Maier, C, Calafut, T. Polypropylene: the definitive user's guide and databook. William Andrew. p. 14, 1998

Manfred L. Polyvinyl Compounds and Others. In: Ullmann's Encyclopedia of Industrial Chemistry, Weinheim, Wiley-VCH, 2000

Fromageau, J, Brusseau, E, Vray, D, Gimenez, G, Delachartre, P. Characterization of PVA cryogel for intravascular ultrasound elasticity imaging. IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control. 2003, 50(10): 1318 - 1324

Kurt L, Herbert H, Werner F, Norbert F. Maleic and Fumaric Acids. In Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH;2005

Brydson JA. Plastics Material. Butterworth Heinemann. 7th Edition, 1999, p124-150

Ohtake, Y, Kobayashi, T, Asabe, H, Murakami, N and Nono, K. Oxidative Degradation and Molecular Weight Change of LDPE Buried under Bioactive Soil for 32-37 Years. Journal of Applied Polymer Science. 1998, 70: 1643-1659


Refbacks

  • There are currently no refbacks.


AJPSE(ISSN 2572-5734)Copyright © 2012-2021. All rights reserved. Published by Ivy Union Publishing, 3204 Valley Rush Dr, Apex, North Carolina 27502, United States